receive many calls a month from people who have only firms "nooks and corners, which would put a cooler of wine or a drink in a cache is a small narrow opening in a wall and a corner is defined as any small indentation. Often these areas are old desk space with a knee support or other areas already built-in custom cabinetry, but off-size. The goal is to install and build-in device wine cooler or beverage in the limited space under the door to give a finished appearance.
Wine and beverage refrigerators, used in embedded applications, with few exceptions are available in standard widths of kitchen cabinet dimensions, depth and height. The most common widths are 15 inches or 24 inches wide, although sometimes you can find a product that is 12 or 18 inches wide. Typical depths are 24 inches and moving the height about 34 cm. No matter what brand of wine or beverage cooler you could opt for there is a high degree of consistency in relation to the size of these products under the counter.
If the desire is to place Wine Cooler these devices in a confined space, you should also consider how the placement that will affect the cooling efficiency of the product. To install one of these devices in a situation without a game, they must be ventilated at the front, similar to the standard vertical refrigerators. front vent carries the heat from the cooling process and allows it to disperse away from the unit. If a wine cooler or beverage is the center back ventilation, like most of all free-standing ones are the heat builds up in the cramped space, making the run more cooler than it was designed for and ultimately "burning".
free standing refrigerators for wine and beverage cans are designed and built with a wide range of different widths, depths and heights. Customers often find one that suits particular crack size and want to use a built-in application. stand-alone wine and beverage coolers require specified clearances to operate efficiently as their back-ventilated design. I usually recommend minimum distances of at least 3 cm around the sides and top of the unit and at least 6 inches for the rear ventilated back. If these distances are not accepted during the installation of a free-standing unit, the unit will most certainly not the first time.
A customer had a corner furniture that is ideally 24 inches wide and 24 inches deep, but was short by half an inch in height. The customer called me and after hearing the lack of height and the specific features of design, I found an easy solution, remove the ceramic tile floor of the niche to gain the height needed for the built-in cooler wanted to buy. In addition, some wine coolers under the table have adjustable legs that can be selected in the correct height needed.
The dilemma of trying to fit the back of a pre-product companies acquired in a corner or crevice to improve the appearance of your home and business needs of a precautionary approach. Put the device in the wrong place where it will not work properly is begging for failure. I believe the best approach, slotted angle or remodeling to incorporate a wine or a cold drink, would be to remove the building limited the cranny and start with new furniture of appropriate size that will give the final result that will enhance the decor of your home. You will not regret the extra expense to ensure success.
0 comments:
Post a Comment